Insert And Remove An Sd Card Into The Instrument Step-By-Step - Leica GR10 Operational Manual

Insert and remove an SD card into the instrument step-by-step

Step Description
The SD card is inserted into a slot inside the SD card/USB port cover on the front of the instrument.
1 Loosen the screw on the SD card/USB port cover.
2 Open the SD card/USB port cover.
3 Place the SD card into the slot. The card should be held with the contacts downwards and facing the slot.
Do not touch the contacts.
4 Slide the card firmly into the slot until it clicks into position.
5 To remove the SD card, gently press inwards on the card to release it from the slot.
6 Place the SD card/USB port cover back over the slot and tighten the cover screw.
Related topics
Directory structure of the memory device
5: Getting started
87