Receiver setup: Firmware management
Background information
In order to manually or automatically install a new firmware version, it must be first loaded onto the SD card.
Press Upload new firmware file
OR Activate the automatic upload of the firmware file to the SD card.
For further information please read the following topics
•
Software: Overview
•
Is my firmware up to date?
•
Firmware upgrade step-by-step
•
Firmware upgrade using Leica GNSS Spider
•
Loading a Language file
Please ensure that there are no power interruptions during the firmware upgrade!
Setting Descriptions
The table below describes the fields in the Firmware tab.
Firmware
Loadable firmware files
Version
Location
Delete
Install
Upload new firmware file
Available firmware upgrades
Available firmware upgrades
Version
Required maintenance date
Download from Leica website
Automatic firmware upgrades
Download automatically
Download from
, to select the firmware file and upload it.
Description
The name of the firmware file. All firmware files loaded onto the SD card are
shown.
The firmware version number.
The location of the firmware file.
Press to delete the firmware file.
Press to install the firmware file.
Press to upload a new firmware file from the computer to the receiver. Opens
the File upload page.
Description
The name of the firmware file available for download from the Leica web site.
This field shows if there is a later firmware version available on the Leica web
site than the one installed on the receiver.
The firmware version number.
Installing new firmware is only possible if a valid maintenance key is available.
The link starts a download of the latest firmware from the Leica website.
Description
Activate to download the firmware to the receiver's SD card automatically from
the location specified at Download from.
Select the location from which the new firmware file is to be downloaded.
The file download can be done from:
6: Context sensitive help
281