Outgoing Data Stream Wizard: Configure Real Time Out Data Stream - Leica GR10 Operational Manual

Hide thumbs Also See for GR10:
Table of Contents

Advertisement

Outgoing data stream wizard: Configure real time out data stream

Background Information
Real time output is used to configure output of real time correction messages for RTK and DGPS.
Setting Descriptions
Tables below describe the settings that can be configured on the Configure real time out data stream page.
Setting
Description
Version
Select the message type and version.
and
message
type
Message type
Leica
Leica 4G
CMR
CMR+
RTCM 2.x
RTCM 2.x (Type
1,2)
RTCM 2.x (Type
2,9)
RTCM 2.x (Type
18,19)
RTCM 2.x (Type
20,21)
RTCM 2.x
(Type 1,2,18,19)
RTCM 2.x
(Type 1,2,20,21)
RTCM 3.x
Description
The proprietary Leica real time data format supporting GPS and GLONASS.
This is the best format to use when working exclusively with Leica Viva
rovers or other Leica rover units.
Leica proprietary RT format supporting GPS (including L5), GLONASS and
Galileo. This is the best format to use when working exclusively with Leica
rover units which support all available GNSS signals.
Compacted formats used to broadcast data for third party receivers.
Compacted formats used to broadcast data for third party receivers.
Differential and Delta Differential (Code) GPS corrections. Use for DGPS
applications. An accuracy of 0.5-5m rms can be expected at the Rover.
Additional messages sent: 3
GPS Partial Correction Set and Delta Differential GPS Corrections. Use for
DGPS applications. An accuracy of 0.5-5m rms can be expected at the
Rover. Use this when a slow data link is being used in the presence of
interference.
Additional messages sent:3
Uncorrected pseudorange and carrier phase measurement. Use for RTK
operations where the ambiguities will be resolved at the Rover (RTK). An
accuracy of around 1-5cm (rms) can be expected after successful ambiguity
resolution.
Additional messages sent: 3, 22, 23, 24
RTK Carrier phase corrections and high-accuracy pseudo-range corrections.
Use for RTK operations. There is negligible difference in the accuracy
obtained using these messages as compared to messages 18 and 19.
Additional messages sent: 3, 22, 23, 24
Output of both Code corrections and uncorrected carrier phase data.
Additional messages sent: 3, 22, 23, 24
Output of both Code and carrier phase corrections.
Additional messages sent: 3, 22, 23, 24
Reduced bandwidth compared to RTCM v2.x, support of Galileo and BeiDou.
6: Context sensitive help
149

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gr25

Table of Contents