Leica GR10 Operational Manual page 51

¦----------- Site Config
¦ ¦------- Site code
¦ ¦------- Antenna type
¦ ¦------- Antenna height
¦
¦----------- Logging sessions
¦ ¦
¦ ¦------- Overveiw page
¦ ¦------- List of configured sessions
¦
¦----------- Data streams
¦ ¦
¦ ¦------- Overveiw page
¦ ¦------- Activate/Deactivate All
¦
¦----------- Network Config (Bluetooth receivers)
¦ ¦
¦ ¦
¦ ¦------- Ethernet
¦ ¦ ¦------- Hostname
¦ ¦ ¦------- DHCP
¦ ¦ ¦------- IP address
¦ ¦ ¦------- Subnet
¦ ¦ ¦------- Gateway
¦ ¦------- Bluetooth
¦
¦----------- Network Config (WLAN receivers)
¦ ¦
¦ ¦------- Ethernet
¦ ¦ ¦------- Hostname
¦ ¦ ¦------- DHCP
¦ ¦ ¦------- IP address
¦ ¦ ¦------- Subnet
¦ ¦ ¦------- Gateway
¦ ¦------- WLAN
¦ ¦------- WLAN radio
¦ ¦------- WLAN profiles
¦
¦----------- Maintenance
¦
¦
¦------- Format SD card
¦------- Format USB device
¦------- Format System
Select to edit site code, antenna type and antenna height.
Select to activate or deactivate configured logging sessions.
Use right and left buttons to activate or deactivate a
session.
Select to activate or deactivate all configured data streams.
Use right and left buttons to activate or deactivate all
sessions.
Edit the GR25 hostname. This is also the Bluetooth name.
Edit the Ethernet settings (DHCP on/off, IP address, subnet
mask, gateway) or enable/disable the Bluetooth device.
Edit the GR25 hostname, the Ethernet settings (DHCP
on/off, IP address, subnet mask, gateway) or the WLAN
settings.
Format the receiver configuration, SD card or attached USB
storage device or stop the USB storage device to remove.
Initialize the ME. Use the up or down button to switch
between the maintenance functions.
4: User Interface
49