Equipment Setup
Basic setup step-by-step
Step
Description
1
Find the power port (PWR) at the back of the GR10/GR25/GM10. Plug the power cable/GEV238 power
supply into the GR10/GR25/GM10.
2
Insert the SD card into the SD card slot. For more information on how to work with the SD card, refer to
Working with the Memory Device.
3
Turn on the GR10/GR25/GM10.
4
Attach the antenna cable, for example the GEV194, 1.8 m antenna cable, to the instrument's antenna port
and to the connector on the antenna.
To access the instrument via Ethernet, USB, Bluetooth or WLAN, refer to:
•
Setup via Web Interface over Ethernet and DHCP
•
Setup in a non-DHCP network
•
Install USB drivers
•
Setup via Web Interface over USB
•
Setup via Web Interface over Bluetooth (GR25)
•
Setup via Web Interface over WLAN (GR25)
5: Getting started
67