Network Connections: Mobile Internet - Leica GR10 Operational Manual

Network connections: Mobile Internet

Background Information
Configure mobile Internet access (e.g. via GPRS device) to the receiver.
Setting Descriptions
The table below describes the settings that can be configured on the Mobile Internet page.
Configure device for Internet usage
Device
Pin code
Puk code
APN
User name
Password
IP address
Connected to
Related topics
Description
Select the device to be used to connect the receiver to the Internet. All
phone/modem devices configured in the device management with mobile
Internet capability are listed.
When Not used is selected, all fields below are hidden.
For using a non-default device, the device must be
configured in advance, via Device Management.
Enter the pin code for the used SIM card.
Enter the Puk code for the used SIM card. Usually this field can be left blank.
The Puk code is a security code for the SIM card for some devices. The Puk
code needs to be entered when the pin code has been entered incorrectly
more than three times. The Puk code will unblock the SIM card.
Enter the access point name (APN) of a server from the network provider,
which allows access to data services. Contact your provider to obtain the
correct APN.
Necessary to access certain APN's. Contact your provider for the APN user
name.
Necessary to access certain APN's. Contact your provider for the APN
password.
Select a dynamic or static IP address to be used. For a static address enter
the IP address manually.
Only available on the GR25.
Select the physical serial port for data transmission
•
Serial port 1
•
Serial port 2
For the GR/GM10, Serial port 1 is configured
automatically as there is only one serial port available.
For slot in devices, this field is not available, the slot-in
port is selected automatically.
This setting is not available when a slot-in device is
selected.
6: Context sensitive help
219