Leica GR10 Operational Manual page 120

Operational Manual (Online Help)
Logging rate The configured rate at which the observations are logged.
Length of file The configured file length. The file length defines how long data is written to one file before a new
file is created.
Log doppler Indicates if logging doppler observations is activated (yes) or deactivate (no) in the logging session.
observations
Log SNR values
Indicates if logging SNR values in the RINEX file is activated (yes) or deactivate (no) in the logging
session.
Store data to Clicking on the SD card link opens an FTP connection to the folder on the SD card where the data
for this logging session is stored. This is only possible when the FTP server access is enabled. To
enable FTP server access, go to Receiver Setup / FTP server.
Auto delete
Shows when the logging session files are automatically deleted.
Archive to Only available if the logging session is writing data to an external USB drive.
Indicates if the logging session is archived to an external USB drive. If an external USB drive it
attached and configured for archiving, click on the link External USB drive to access the UDB drive
via FTP.
Archive to FTP Indicates if the logging session is archived to an FTP location. If configured, the used FTP location
location
is listed.
Remaining
This field is only shown for timed logging sessions. Shows the number of repeats remaining.
repeats
Latest file The file name of the last file that this logging session was written to.
Related Topics
Logging sessions: Overview
GNSS management: Logging sessions
GNSS management: Smart clean-up
118
The FTP access to the SD card may not work in all browsers. Set the FTP
server access restrictions to allow anonymous access to ensure SD card
access via the browser link. Go to Receiver Setup / FTP server.
The SD card can run full when Auto delete is set to Never.
Some browsers have limitations concerning their FTP capabilities.
Please use a dedicated FTP client in case you experience problems while
accessing files via FTP.
For RINEX and Hatanaka logging sessions it will always list the observation file
name (*.10o).