Status Tracking: Sbas - Leica GR10 Operational Manual

Status tracking: SBAS

Field Description
The table below describes the fields in the Status: SBAS tab.
The information shown is dependent on the settings configured on the GNSS management: Tracking page and which satellite
options are available on the receiver.
Press the Refresh icon to update the displayed data.
Field Description
Icon
Satellite is sued for calculating a DGPS position.
Sat
The Pseudo Random Noise (PRN) number of the satellite.
System
The SBAS satellite system.
S/N L1
The signal to noise ratio on L1. The number is shown in brackets if the signal is not currently being used in
the position calculations.
To enable or disable the automatic update of the status page, please go to Receiver setup: Web server and
activate or deactivate the Automatic status page reload.
If the health status of a satellite is changed by a user and is different to what is sent in the broadcast
ephemeris, this satellite is shown in brackets. Go to GNSS management / Tracking to change the health
status of a satellite.
Related topics
Tracking: General
Tracking: GPS
Tracking: GLONASS
Tracking: GALILEO
Tracking: BEIDOU
Tracking: QZSS
GNSS management: Tracking
6: Context sensitive help
109