Status: Position - Leica GR10 Operational Manual

Operational Manual (Online Help)

Status: Position

Background Information
Shows the currently calculated position and the user entered reference position of the receiver. The receiver's position is
configured via GNSS Management / Site name and coordinates.
•
If the entered reference position and currently calculated position differ by more than 100 m, an error message is
displayed.
Field Descriptions
The table below describes the fields in the Status: Position page.
Press the Refresh icon to update the displayed data.
Field Position quality (Position type)
Latitude, Shows the currently calculated position of the
Longitude, receiver in geodetic coordinates.
Ellipsoidal
height
X, Y, Z Shows the currently calculated position of the
receiver in Cartesian coordinates.
Update rate The rate at which the position is currently
calculated. Per default 1s. If an incoming real
time data stream or an outgoing NMEA data
stream are configured, the highest configured
data rate is used.
Displacement The Displacement in X shows the difference in X between the currently calculated position and the
in X entered Reference Position
Displacement The Displacement in Y shows the difference in Y between the currently calculated position and the
in Y
entered Reference Position
Displacement
The Displacement in Z shows the difference in Z between the currently calculated position and the
in Z entered Reference Position.
102
The header for this column
shows the current Position
quality (Navigated, DGPS
or RTK fixed) as calculated
from the incoming
correction data stream and
the Position type
(Reference station,
Monitoring, Network RTK)
as selected for the
incoming real time data
stream.
Reference Position
Shows the entered reference position of the receiver
in geodetic coordinates.
Shows the entered reference position of the receiver
in Cartesian coordinates.