Outgoing Data Stream Wizard: Configure Tcp/Ip Server - Leica GR10 Operational Manual

Operational Manual (Online Help)

Outgoing data stream wizard: Configure TCP/IP server

Background Information
The receiver works as a TCP server allowing TCP clients to connect to the receiver's ports to receive the data streams.
Setting Descriptions
The table below describes the settings that can be configured on the Configure TCP/IP server page.
Setting
TCP/IP port
Allow connections
from
Limit access range
Press to go back to the previous wizard step. Press
Press to cancel and return to GNSS management: Outgoing data stream.
156
Description
Enter the TCP/IP port of the receiver.
Specify the number of users that are allowed to connect to the data stream via TCP/IP.
•
Minimum of 1 user, maximum of 10 users.
•
This setting is only available for receivers with the GRL115, Multi-Client and Ntrip
Caster option key loaded. For all other receivers the number of users is fixed to 1.
The option can be purchased from Leica Geosystems.
Select the range of IP addresses, which are authorized to access the receiver.
The valid IP range is from 1.0.0.0 to 223.255.255.255.
to continue to the next wizard step.