Leica GR10 Operational Manual page 176

Operational Manual (Online Help)
If a RTK network is selected (anything other than None), then NMEA GGA messages (using the
calculated position) will be automatically sent from the receiver to the RTK server every 5
seconds.
For example:
$GNGGA,130334.80,4724.5416858,N,00937.0529382,E,1,14,0.7,469.765,M,,,,*hh<CR><LF>
$GPGGA,130334.80,4724.5416858,N,00937.0529382,E,1,09,0.7,469.765,M,,,,*hh<CR><LF>
$GLGGA,130334.80,4724.5416858,N,00937.0529382,E,1,05,0.7,469.765,M,,,,*hh<CR><LF>
Send user ID Enable the sending of NMEA GPUID authentication details if necessary for user authentication
with the RTK correction provider.
User ID 1 and User Enter the users IDs. User ID i must be entered when the check box is enables. User ID 2 is
ID 2
optional.
Configure Description
position
calculation
Position type Select the position type to be used
Position type
Reference Station
Monitoring
Network RTK
Max. position The following position quality levels are available:
quality
Position quality
RTK fixed position
Differential code
(DGPS position)
Press to go back to the previous wizard step. Press
Press to cancel and return to GNSS management: Incoming data streams.
Related Topics
Incoming data stream wizard: Connection
174
sends interpolated corrections (ionospheric and geometric) to
the rover. This product is best suited to broadcast transmission.
This product would be used whe you have an old rover that
cannot support the MAX format. The end user can have
information about error/correction sizes.
Description
For detecting antenna movements using long baselines.
For monitoring applications using short baselines.
For rover-like position calculation.
Site monitor option
available
not available
to continue to the next wizard step.