Gnns Spider / Remote Access - Leica GR10 Operational Manual

Operational Manual (Online Help)

GNNS Spider / Remote Access

Overview
Per default, no port on the GR/GM Series instrument is open for remote access from any OWI software. In order to allow OWI
access, a port must be defined and opened.
The OWI software can then change the receiver configuration and define and start data streams and a logging session.
In order to use any non-Leica OWI software with a GR/GM Series instrument, an option key is required.
Spider and remote access
The Receiver setup: Spider and remote access page lists all ports on the GR/GM Series instrument that are open for any
OWI based tool to connect to the instrument and change the settings via OWI commands.
The page also allows creating new OWI ports and editing or deleting configured ports.
Access to the GR/GM Series instrument can be configured via
•
TCP/IP server connection
•
TCP/IP client connection
•
Serial port
•
Modem
•
Radio
It is also possible to connect a GR/GM Series instrument to the GNSS Spider site server via a USB or Bluetooth PAN
connection. In this case, the connection will be handled like a network connection via an Ethernet cable.
Please see the chapter Spider and remote access: Overview for more detailed information on how to configure a remote
access.
Licensing
Leica GNSS Spider users do not need a license to connect the GR/GM Series instrument as an active site to the Leica GNSS
Spider software.
Requirement:
•
GR10: Leica GNSS Spider v4.0 or later must be installed.
•
GR25: Leica GNSS Spider v4.2 or later must be installed.
•
GM10: Leica GNSS Spider v4.3 or later must be installed.
Any non-Leica OWI based software requires the GRL117 Extended OWI license installed on the GR/GM Series instrument to
be allowed to change any configuration on the receiver.
If the GRL117 Extended OWI license is not available on the GR/GM Series instrument, a remote port can be configured and
activated but can only be used by Leica GNSS Spider.
To check the currently installed licenses on the receiver, go to Status / Receiver Information.
304