Remote Access Wizard: Configure Tcp/Ip Client - Leica GR10 Operational Manual

Operational Manual (Online Help)

Remote access wizard: Configure TCP/IP client

Background Information
The TCP/IP client connection setting allows the receiver to act as a TCP client and connect to a configured IP address and
port. This way no port has to be opened in the firewall on the receiver side to allow clients to connect to the receiver.
Setting Descriptions
The table below describes the settings that can be configured on the Configure TCP/IP client page.
Setting
TCP/IP server address
Data receive time out
TCP/IP port
Press to go back to the previous wizard step. Press
Press to cancel and return to Spider and remote access: Overview .
240
Description
Enter the numeric IP address or the hostname of the Server to connect to.
The valid IP range is from 1.0.0.0 to 223.255.255.255.
If for a Spider / OWI connection no OWI requests are received within the specified time, the
connection will be automatically reinitialized. This will help keep the communication channel
up and running, especially when using an instable IP network environment, e.g. mobile
networks.
If the timeout value is set to 0 (zero), there will be no automatic reinitialization (default
setting).
Enter the TCP/IP port on the Server for the receiver to connect to.
to continue to the next wizard step.