Operational Manual (Online Help)
26
A DOS window is opened and a batch file is started to configure the IP settings for the RNDIS network
adapter.
27
Press any key to close the DOS window.
28
Disconnect and reconnect the USB cable.
29
Open a browser and type in the IP address: 192.168.254.2 to access the Web interface.
30
Configure the instrument for all required settings.
31
Use the default User name (Admin) and Password (12345678).
After logging in the first time you must create a new user account, including a new user name and password.
The default user account can then be deleted. Go to Access the web interface for the first time and change
the default user for a step-by-step guide.
Please make sure that JavaScript is allowed to be executed. Check the browser settings if you should have
problems using the web interface.
Troubleshooting
Troubleshooting: Installing USB drivers
74