Outgoing Data Stream Wizard: Configure Tcp/Ip Client - Leica GR10 Operational Manual

Outgoing data stream wizard: Configure TCP/IP client

Background Information
The TCP/IP client connection setting allows the receiver to act as a TCP client and send data out to a configured IP address
and port. This way no port has to be opened in the firewall to allow clients to connect to the receiver. Furthermore since the
data stream is now sent to a PC port, the number of connections to the data stream is not limited by the receiver.
Setting Descriptions
The table below describes the settings that can be configured on the Configure TCP/IP client page.
Setting
Server IP address
TCP/IP port
Press to go back to the previous wizard step. Press
Press to cancel and return to GNSS management: Outgoing data stream.
Description
Enter the numeric IP address of the Server to connect to.
The valid IP range is from 1.0.0.0 to 223.255.255.255.
Enter the TCP/IP port of the receiver.
to continue to the next wizard step.
6: Context sensitive help
157