Leica GR10 Operational Manual page 134

Operational Manual (Online Help)
Marker number Enter a marker number.
Coordinates Description
Coordinate Type Choose the coordinate type, either Geodetic or Cartesian.
Latitude The latitude of the site.
Longitude The longitude of the site.
Ellipsoidal height The ellipsoidal height of the site.
Time settings
Time zone
Get current position
Restore default
values
132
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
- _ . (hyphen, underscore, period and space are also allowed)
•
The marker number is used to occupy the equivalent entry in the RINEX header
when creating RINEX files for this site.
•
If no Marker Number is entered then it will default to the Site Code.
•
The maximum number of characters is 20.
•
ASCII characters
Only certain
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
- _ . (hyphen, underscore, period and space are also allowed)
Description
Select the time zone.
Daylight saving time is not accounted for.
Click this link to apply the currently computed navigated position as the reference
position for this site. This is not an accurate coordinate with a known accuracy but
merely an estimate. Without knowing the reliability of the coordinate of the
reference station, the reference station should not be used for relative positioning. A
position adjustment is necessary to calculate the exact coordinate for the reference
position. The current position helps to set up reference station receivers to collect
data for this position adjustment.
The Save button
Press to restore the default values.
The restore default button fills all fields with the default
values and stores these values. Pressing the save button
is not necessary. When accepting the confirmation
message, all settings on this page are overwritten with the
default settings.
are allowed.
must be pressed to store the current position.