Leica GR10 Operational Manual page 282

Operational Manual (Online Help)
Initialize measurement engine
Safely remove USB drive
Reset internal temperature
high/low
Press the associated icon to execute the selected action.
The actions, Reboot, Format SD card or USB device, Format receiver settings and Initialize
measurement engine, if executed, will result in the receiver rebooting.
FAT32 format should not be used for memory devices bigger than 32GB.
The GR25 supports the use of FAT16/FAT32/ExFAT devices. NTFS devices are not supported. Formatting of
NTFS devices is possible. The disk format will be changed to ExFAT.
External hard disks that comply with USB 2.0 specifications (do not use more than 500 mA at any time) can
be powered by the GR25 receiver.
Please make sure the USB hard drive used with the GR25 complies with this specification. If a USB hard disk
is used that does not comply with this specification, it is highly recommended to self-power the hard disk
when used with the GR25 receiver.
External memory sticks are powered by the GR25.
When the external USB drive is formatted by the receiver, the exFAT file system is used. Note that Windows
XP does not support this file system, and will not read the drive without an additional update, which is
available here:
http://www.microsoft.com/download/en/details.aspx?id=19364
Related topics
Appendix F: GR/GM10 default settings
Appendix F: GR25 default settings
Format receiver settings via Web interface step-by-step
Format receiver settings via instrument buttons step-by-step
Status: System resources
280
* GR25 only
Press to delete all current ephemeris and almanac data and restart the
position computation.
Press to stop and power down the USB drive to safely remove it from the
receiver.
Unplugging the USB drive without stopping it can
cause data loss and may prove to be harmful for the
life of the USB device.
Press to reset the recorded internal temperature (high/low) of the receiver.