Leica GR10 Operational Manual page 220

Operational Manual (Online Help)
Renew DHCP lease
Trouble-shooting
If you are not able to connect to your receiver via ethernet, please try the following:
•
If the receiver has a static IP address, use this address and not the hostname.
•
After you changed the ethernet configuration or the hostname of a receiver, call ipconfig /flushdns in
a command prompt on the computer where you want to access the receiver. Otherwise the
computer may use the local DNS cache to resolve the IP address.
If Residential Gateway is enabled and the Ethernet device is used as LAN interface, turning on DHCP may
prevent Residential Gateway setup to work properly.
Please refer to the Residential Gateway Online Help page for more information.
Related topics
Receiver setup: DynDNS
Use DHCP to automatically assign an IP address and all network parameters to a instrument
Use a hostname to access a instrument with a static IP address
Receiver Setup: Residential Gateway
218
Press to trigger a renewed IP address from the DHCP server.
This option is only available when the Obtain IP address automatically check
box is active.