Gnss Management: Antenna Management - Leica GR10 Operational Manual

Operational Manual (Online Help)

GNSS management: Antenna management

Background information
Upload new antenna files, create new antennas and restore antenna default values.
Field Descriptions
The table below describes the fields in the Antenna management tab.
Field
Loadable antenna files
Location
Delete
Install
Upload new antenna
file
Installed antennas
Type
Delete
Edit antenna
Create new antenna
(copy)
Create new antenna
Restore default values
Related topics
204
Description
The name of the antenna file. All antenna files loaded onto the SD card are
shown.
The location of the antenna file.
Select to delete the antenna file.
Select to install the antenna file.
Select to upload a new LIST.ANT antenna file exported previously from LGO
from the computer to the receiver. The File upload page will open.
All antennas currently configured on the receiver are listed.
Shows the antenna type. Default antennas are available in the factory default
settings. User defined antennas have been added manually.
Press Delete to permanently delete the antenna.
The ADVULLANTENNA cannot be deleted.
Press to edit the antenna settings. The Edit antenna page will open. The antenna
name cannot be edited.
The ADVULLANTENNA cannot be edited.
Create a new antenna based on the settings of an existing antenna.
Press to create a new antenna. The Create antenna page will open.
Restore the default antenna settings. This will restore all default antennas with
the factory default settings. User defined antennas will not be deleted.
The restore default button fills all fields with the default
values and stores these values. Pressing the save button is
not necessary. When accepting the confirmation message,
all settings on this page are overwritten with the default
settings.