Setup Via Web Interface Over Ethernet And Dhcp - Leica GR10 Operational Manual

Operational Manual (Online Help)

Setup via Web Interface over Ethernet and DHCP

Setup via Web Interface over Ethernet and DHCP
Step Description
1 Start the computer.
2 To connect the instrument to the local LAN supporting DHCP, plug an Ethernet cable with a RJ45 connector into
the RJ45 Ethernet port on the back of the instrument.
3 Connect the other end of the cable with a network device of your LAN, e.g. hub, switch or router.
4 Turn on the instrument.
5 Open a browser window on your computer.
6 Type "GR*******" or "GM******** into the browsers address field, where ******* is the serial number of the
instrument. For example, GR1700001 or GM1700001.
7 The Web interface will now be available. Configure the instrument for all required settings.
68
a. GR10/GR25/GM10
b. Local network
(LAN)
c. DHCP server
d. Ethernet cable
e. Computers with
Web interface