Leica GR10 Operational Manual page 200

Operational Manual (Online Help)
Clear
Delete
Edit FTP location
Create new FTP location (copy)
Create new FTP location
FTP location properties
The table below describes the content of the FTP location pop-up box that is displayed when clicking on the underlined FTP
location name.
Properties
Name
FTP server host
FTP server port
FTP root directory
Directory naming convention
for FTP push
Username
In use
Use passive mode
Related topics
Receiver setup: New FTP location
198
link to test the settings.
Files deleted from the queue will not be automatically pushed
to the FTP server.
Press to clear the queue of pending files to be pushed to an FTP location. This
deletes a backlog of files caused by for example, FTP server unavailability.
•
The Clear icon is only shown when the Queue number
is greater than zero.
•
Files deleted from the queue will not be automatically
pushed to the FTP server.
Press to permanently delete the selected FTP location.
Note: FTP locations that are currently in use cannot be deleted.
Press to edit the selected FTP location.
Press to create a new FTP location based on the settings of an already existing
location.
Press to create a new FTP location.
Description
The configured name of the FTP location.
The configured FTP server hostname (IP or URL).
The configured TCP/IP server port of the FTP server
The configured FTP root directory.
The directory naming convention used for FTP push. This can be a different one
than the one to store logged files onto the SD card.
The configured username which is used to connect to the FTP server.
Indicates if the FTP location is used in a logging session.
Indicates if Use passive mode is activated for the selected FTP location.