Incoming Data Stream Wizard: Set Streaming Status - Leica GR10 Operational Manual

Incoming data stream wizard: Set streaming status

Background Information
An incoming real time data stream can only be activated if GPS and GLO tracking of L2C signals is
disabled.
If you want to activate an incoming real time data stream make sure to first disable the tracking of GPS and
GLO L2C signals.
Setting Descriptions
The table below describes the settings that can be configured on the Set streaming status page.
Setting
Activate data stream
Press to store the data stream configuration.
Press to go back to the previous wizard step.
Press to cancel and return to GNSS management: Incoming data stream.
Related topics
Data streams: Overview
GNSS management: Incoming data streams
Description
Deactivate the data stream if you do not want it to run immediately.
6: Context sensitive help
181