•
•
•
•
REMOVAL
1. Remove the rear window assembly.
2. Remove the back door trim and service hole cover.
Disconnect the connector.
Remove the assembly by removing the bolt and three
screws.
3. Detach the control motor and back door lock by removing
the two screws .
INSTALLATION
1. Install the control motor assembly.
(1) Attach the control motor and back door lock using two
screws.
(2) Install the back door opener assembly to the back door
using the bolt and three screws .
(3) Connect the connecter.
2. Install
the
service hole cover and back door trim.
3. Install the rear window assembly .
BODY ELECTRICAL SYSTEM
WFE90-8E343
I,\=I' L m
§ 5
IYsiJ
It=
of
ouu
~T
-
~
E90-BE344
VIFE90-BE345