Daihatsu F300 Service Manual page 1138

Hide thumbs Also See for F300:

Table of Contents

Check of disc pad

( 1) Checking of brake disc pad for thickness, wear and damage

Measure brake pad thickness.

If the pads thickness is less than 1.0 mm (0.04 inch),

replace the pad.

Inspect uneven wear and damage.

(2) Checking of brake disc for wear, damage

Clean the brake disc surface and measure the disc

Specified thickness

Minimum limit

Difference in stock thickness on the same

circumference:

Not to exceed 0.015 mm (0.0006 inch)

BRAKE HOSE & TUBE

Check of brake hose and tube

Checking of following parts

Hoses and tubes for damage, cracks

Hoses for deformation or swelling

Tubes for corrosion or rust

@ Connection of fluid leakage

@ Tube clamps for tightness

Hoses for extreme bending, twisting or pulling

Check of brake fluid

If the fluid level is below of the MIN line, check for leak in the

hydraulic system and add fluid up to the MAX line .

Chapters

Table of Contents