Daihatsu F300 Service Manual page 1174

Hide thumbs Also See for F300:
Table of Contents

Advertisement

[HO-C Engine)
3. Removal of air cleaner hose
( 1) Remove the air cleaner hose from the air cleaner case
by removing the two bolts and one clamp.
(2} Disconnect the vacuum motor hose and hot air intake
hose (except for GCC specification).
4. Removal of the radiator reserve tank
( 1) Disconnect the radiator reserve tank hose from the
radiator
(2) Pull up the radiator reserve tank together with hose .
5. Removal of the power steering pump drive belt.
(Power steering equipped vehicle only)
( 1) Loosen the adjusting bolt and two tightening bolts. Then
push down the pump
(2) Remove the drive belt
6. Remove the air conditioner drive belt by loosening the ad-
justing bolt. (Air conditioner equipped vehicle)
7. Remove the three clamps for clutch cable provide on the
fan shroud .
EM-33
ENGINE MECHANICALS
Idle pulley (without P/S model)
or P/S pump pulley (with P/S model)
Compressor
drive belt
'
Crankshaft pulley

Advertisement

Table of Contents
loading

Table of Contents