Daihatsu F300 Service Manual page 1156

Hide thumbs Also See for F300:

Table of Contents

4. Clean the element with compressed air. First, blow com-

pressed air from the inner side of the element thoroughly.

Then, blow off the outer side of the element.

The air pressure to be used for this cleaning operation

should not exceed 392.3 kPa (4.0 kgf/cm

Replace the air filter element, if necessary.

5. Place the element in the air cleaner case. Secure the ele-

ment with the wing nut.

6. Install the air cleaner cap to the air cleaner case. Secure

the air cleaner cap by tightening the three clamps.

4. Inspection of

(See the Charging System Section.)

5. Inspection of spark plugs

(See page IG-12.)

Recommended Spark Plugs:

Manufacturer

ENGINE MECHANICALS

Chapters

Table of Contents