Daihatsu F300 Service Manual page 1246

• 5. Removal of air cleaner assembly with hose
[HO-C Engine]
(1) Remove the air cleaner hose from the air cleaner case
by removing the two bolts.
(2) Disconnect the vacuum motor hose and hot air intake
hose.
(Except for
GCC
and tropical specifications)
(3) Disconnect the following hoses at the air cleaner side.
lTC vacuum hoses
• PCV hoses
• Vacuum hoses to BVSV
(4) Remove the air cleaner assembly by removing the at-
• taching bolts of the air cleaner bracket and wing nut.
•
•
[HO-E Engine]
(1) Remove the air intake chamber
by
removing the two
clamps and three bolts.
(2) Remove the two vacuum hoses for air conditioner idle--up
and for power steering.
(3) Disconnect the clamp for the clutch cable at the air
cleaner .
(4) Remove the bolts provided at the left fender panel and
radiator center support.
{5) Remove the three air cleaner attaching bolts. Then,
remove the air cleaner assembly .
EM-105
ENGINE MECHANICAL$