Daihatsu F300 Service Manual page 1182

• INSTALLATION OF TIMING BELT
•
•
•
NOTE:
• Check the water pump for water leakage and the oil seal
for oil leakage.
Repair any water leakage or oil leakage, if necessary.
1. Attach the tension spring to the timing belt tensioner. Hang
the tension spring hook on the pin. Assemble the timing belt
tensioner in place and install the bolt.
CAUTION:
• Hang the spring hook securely on the pin groove.
• Ensure that the pin at the oil pump is frtted into the pin
hole of the timing belt tensioner .
2. While pulling the timing belt tensioner fully toward the water
pump side, temporarily tighten the attaching bolt of the
timing belt tensioner.
3. Installation of crankshaft timing belt pulley
(1) Install the crankshaft timing belt pulley flange with its
recessed side facing toward the oil pump side.
(2) Install the crankshaft timing belt pulley on the crankshaft
by aligning
it
with the key groove. Install the setting bolt
of the crankshaft timing belt pulley. Align the stamped
mark of the crankshaft timing belt pulley with the in-
dicator .
EM-41
ENGINE MECHANICAL
Wf'E90.EM
0