Daihatsu F300 Service Manual page 1252

•
•
•
•
20. Disconnect the connectors from the transmission and trans-
fer by jacking up the vehicle. Disconnect the air breather
hose from the transmission.
21. Removal of starter
( 1) Disconnect the connector with lock and remove the
harness clamping bolt.
(2) Remove the starter by removing the two attaching bolts .
22. Remove the attaching bolts which install the engine to the
transmission.
23. Remove the attaching bolts of the engine mountings while
suspending the engine. using a chain block .
24. Take out the engine from the engine compartment, using a
chain block.
CAUTION:
• Be careful not to allow the engine to hit the vehicle body
or other parts.
• Make sure that all hoses and wires have been discon-
nected from the body .
EM-111
ENGINE MECHANICALS