Daihatsu F300 Service Manual page 1237

ENGINE MECHANICALS
9. Install the radiator hose No. 1 to the radiator upper tank.
Tighten the two clamps and two attaching bolts.
NOTE:
Ensure that the clamp are installed as illustrated in right
figure.
10. Connect the vacuum hose for the brake booster to the
·Intake manifold.
11. Installation of engine wire harness
(1) Install the engine wire clamps and engine ground cable.
(2) Connect the injector connector.
(3) Connect the flowing connectors.
CD
Throttle possition sensor
G)
®
Intake air temperature sensor®
@
Idle speed control VSV
®
@
EGA VSV and harness clamp
@
®
Air conditioner idle up VSV
®
®
Idle up VSV connector
(Pressure sensor, Pressure VSV and clamp. @)
®
Air conditioner water temperature switch.
CD
@
Water temperature sender gauge@
®
Water temperature sensor
®
EM-96