Daihatsu F300 Service Manual page 1163

ENGINE MECHANICALS
(9) Install the engine ground wiring harness to the cylinder
head. (Radio equipped vehicle only)
Tightening Torque: 3.0 - 4.9 N-m (0.3 - 0.5 kgf-m)
(10) Connect the PCV hoses to the cylinder head cover.
(11) Install the spark plug wires to the spark plugs.
NOTE:
• Be sure that the spark plug wire is connected securely
to each spark plug.
• Care should
be
exercised not to damage the spark plug
wire rubber grommet with the spark plug tube.
(12) Install the spark plug wires to the clamp.
(13) Install the intake air chamber to the intake air hose.
Secure it to the bracket with the three bolts.
(HO-E Engine only)
(14) Insert the vacuum hose into the intake air chamber.
(HO-E Engine only)
(15) Start the engine. Ensure that the engine exhibits no
trouble, such as oil leakage.
EM-22
•
•
•