Daihatsu F300 Service Manual page 1172

• 8. Connect the distributor connector. Install it to the clamp.
•
•
•
9.
Install the spark plugs using the following
SST.
SST: 09268-8n03-QOO
Tightening Torque: 14.7- 21.6
N-m
(1.5 - 2.2 kgf-m)
10. Connect the spark plug wires.
NOTE:
• Be sure that the spark plug wire is connected securely
to each spark plug.
• Care should
be
exercised not to damage the spark plug
wire with the spark plug
tube.
11. Attach the spark plug wires to the clamp.
12.1nsert the intake air chamber into the intake air hose.
Secure it with the three attaching bolts .
13. Insert the vacuum hoses into the intake air chamber .
EM-31
ENGINE MECHANICALS