Daihatsu F300 Service Manual page 1177

Hide thumbs Also See for F300:

Table of Contents

ENGINE MECHANICALS

8. Remove the three clamps for clutch cable provide on the

9. Removal of fluid coupling with fan and fan shroud.

(1) Disconnect the air breather hose from the radiator

(2) Remove the four water pump pulley attaching nuts.

Then detach the fluid coupling with fan from the water

pump pulley tempporarily.

(3) Remove the drive belt by loosening the alternator pulley

adjusting bolt.

(4) Remove the water pump pulley.

(5) Remove the two fan shroud attaching bolts from the

(6) Unlock the lock section of the fan shroud lower part from

the radiator by pulling up the fan shroud.

(7) Remove the fan shroud together with fluid coupling with

fan from the engine comportment

10. Remove the crankshaft pulley by removing the four attach-

Place the gear shift lever in the 5-th gear position so as

to prevent the rotation of crankshaft.

Chapters

Table of Contents