Daihatsu F300 Service Manual page 1221

ENGINE MECHANICALS
4. Apply
oil to the valve stem. Instal! the valve to the cylinder
head.
NOTE:
• Care must
be
exercised as to the installing position.
Do not pull out the valve once it has been inserted.
• If
the
inserted valve should
be
pulled out, replace the
valve stem oil seaL
5. Assembly of valve springs, valve spring retainers and valve
spring retainer locks
(1) Assemble the valve spring in such a way that the
painted side (the side having a larger pitch) comes at
the valve spring retainer.
(2) Install the valve spring retainer to the valve spling. In-
stall the valve spring retainer locks while compressing
the valve spring retainer, using the following SST.
SST: 09202-87002.()0()
(3) After installing the valve spring retainer lock, lightly tap
the valve spring retainer with a hammer or the like so
as to ensure that the valve spring retainer locks are
installed securely.
6. Installation of camshaft and rocker shafts
(1) Wash and dry the holes for the camshaft cap attaching
bolts.
EM-80
•
WFE90-EM746
•