Daihatsu F300 Service Manual page 1234

•
•
•
•
Rocker arm condition
(1) When valve rocker arms of No. 1 cylinder is
free;
"0"
marks are available to adjust
(2) Turn the crankshaft 360 degrees.
(3) When valve rocker arms of No. 4 cylinder is free;
"x" marks are available to adjust.
Valve Clearances (Cold):
NOTE:
Intake: 0.18
mm
Exhaust:
0.25
mm
Cylinder No.
IN
EX
• The valve clearance should
be
readjusted after the engine
has been warmed up thoroughly .
2. Installation
of
cylinder head cover
(1) Clean the cylinder head gasket surface of the cylinder
head.
(2) Check the cylinder head gasket for damage. Replace
the cylinder head gasket, as required. Assemble the
cylinder head gasket with the identification mark facing
toward the intake side.
(3) Check the rubber grommets of the spark plug tubes for
damage .
Replace the rubber grommets, as required.
• Replacement of rubber grommets
For removal operation, use a slotted pin puller .
EM-93
ENGINE MECHANICALS
1 2 3 4
0 0
X X
0
X
0
X
ldentlficaiton mark