Daihatsu F300 Service Manual page 1133

Hide thumbs Also See for F300:

Table of Contents

RUNNING SYSTEM

Air pressure

(1) Check to see if the tire air pressure conforms to the

specification. using a tire gauge.

(2) Ensure that no air leaks from the tire valve and that the valve

cap is attached.

For the specified air inflation pressure, see the caution plate

attached to the vehicle. Be very careful not to overinflate the

tires excessively.

(1) Inspect the tread section for wear. Ensure that the groove

depth is at least 1.6 mm (0.063 in.).

Care must be exercised as to the wear indicator mark.

(When the remaining groove depth is reduced to less than

in.), the wear indicator mark will become

(2) Inspect the tire for uneven wear, ridge and other abnormal

If the tires exhibit an uneven wear pattern, check the wheel

balancing and front wheel alignment

Crack and damage

Check that the tread section and side wall section are free from

cracks and damage.

Objects caught in tire pattern

Ensure that no nail, metal chip, gravel or other foreign matters

lodge at the grooves of each tire, or none of them sticks into

Looseness of lug nuts and bolts

Check the wheel lug nuts and bolts for looseness, using a wheel

Tightening Torque: 88.2- 117.6 N·m (9.0- 12.0 kgf·m)

Wear indicator

Chapters

Table of Contents