Daihatsu F300 Service Manual page 1312

•
•
•
•
(4) Connect the fluid coupling with the fan by means of the
four attaching bolts. Then, connect the fluid coupling
with fan together with the fan shroud.
Tightening Torque:
9.8- 17.7
N·m
(1.0- 1.8
kgf-m)
(5) Install the V ribbed belt.
(6) Perform the
adjustm~nt
in such a
way
that the deflection
at the midpoint between the water pump pulley and the
alternator may become the specified value when a force
of
1 0
kg
(22
lb) is applied to the midpoint.
Specified Belt Deflection
NOTE:
New Belt: 4.0 - 5.0
mm
Used Beft: 5.0 - 6.0 mm
•
"New belt" refers 10 a belt
which has been used less than
5 minutes on a running engine.
"Used 5
belt"
refers to a
beft
which has been used on a
running engine 5 minutes or more.
(7) Insert the lock section of the fan shroud to the radiator.
Then. tighten the two attaching bolts at the radiator
upper side.
(8) Connect the radiator hose No.1
to
the radiator upper
tank.
Tighten the two clamps and two attaching bolts.
(9) Connect the radiator outlet hose
to
the center connec-
tion .
EM-171
ENGINE MECHANICALS
Water pump pulley
Alternator pullery
"""'""'"'