Daihatsu F300 Service Manual page 1127

Hide thumbs Also See for F300:

Table of Contents

HO-C (Only for GCC Specifications)

Plug the pipe ®and

with your fingers and blow compressed

air of 294 kPa (3 kgf/cm

Check that the air comes out of the bottom pipe

Check that no activated charcoal comes out.

Do not attempt to wash the charcoal canister.

(3) Install the charcoal canister and reconnect the rubber hose.

[HOT ENGINE OPERATIONS]

IGNITION TIMING

Adjustment of ignition timing

( 1) Connect the tachometer to the ignition coil.

(2) With the engine idling as specified, use a timing light to

check the timing.

Ignition timing:

2° BTDC/850 rpm

(3) If necessary, loosen the distributor bolts and turn the

distributor to align the marks. Re-check the timing after

tightening the distributor.

Disconnect the vacuum hose of sub-diagram from the

vacuum advancer of distributor and close the vacuum

hose during test.

Chapters

Table of Contents