Daihatsu F300 Service Manual page 1270

•
•
•
•
3. Immerse the thermostat in water, and check the valve
open~
ing temperature by heating the water gradually.
Specifications
Valve opening
Valve lift
temperature
·c
Standard
76-80
8.5 mm or more
at
specifications
we
Cold area
82-86
8.5 mm or more at
specifications 98'C
Replace the thermostat if the valve operation fails to con-
form to the specifications .
INSPECTION OF OIL PAN
1. Visually inspect the oil pan for damage or cracks.
Replace the oil pan, as requ·lred.
INSPECTION OF OIL CLEARANCE AND
SELECTION OF BEARING
1. Measurement of main journal oil clearance
(1) Install the main bearings to the cylinder block and
crankshaft main bearing cap.
NOTE:
• Do not touch the metal surface of the bearing.
(2) Place the crankshaft in the cylinder block .
EM<29
ENGINE MECHANICALS
WFE90-EM404