ENGINE MECHANICALS
10. Disconnection of exhaust pipe
(1) Remove the exhaust manifold cover.
(2) Disconnect the exhaust pipe tram the exhaust manifold
by removing the three attaching nuts.
(3} Disconnect the exhaust pipe bracket from the side of the
transmission.
11. Removal of vacuum hoses at surge tank side
(1) Distributor diaphragm
<D
(2) BVSV@
(3) Pressure VSV ®(U.S. specifications only)
(4) Air conditioner idle-up VSV@
(5) Power steering ACV@
(6) Brake booster@
(7) Charcoal canister®
i2. Removal of distributor
(1) Disconnect the distributor wire connector.
(2) Remove the distributor from the
cylinder
head
by
remov-
ing the two attaching bolts.
NOTE:
•
Since the remaining engine oil
will
flow out,
be
certain
to
place a cloth or the like.
13. Removal of engine wire harness.
(1) Disconnect the following connectors.
<D
Throttle position sensor
CD
®
Intake air temperature sensor®
®
Idle speed control VSV ®(U.S. specifications only)
@ EGRVSV and harness clamp@(U.S. specifications
only)
@ Air conditioner idle-up VSV@
®
Pressure sensor, pressure VSV and clamp®
(i)
Air conditioner water temperature switch
®
®
Water temperature sender gauge@
®
Water temperature sensor®
®
Oxygen sensor
®
EM-108
•
•
•
•