Daihatsu F300 Service Manual page 1204

•
•
•
•
DISASSEMBLY OF CYLINDER HEAD
1.
Removal of camshaft timing belt pulley
(1) Remove the attaching bolts of the camshaft timing belt
pulley, while preventing the camshaft timing belt pulley
from turning
with SST.
SST: 09278-87201-000
{2) Remove the camshaft timing belt pulley.
2.
Remove the valve rocker shaft sub assembly No. 1 (intake
side) and No.2 (exhaust side)
by
removing the ten attach-
ing bolts.
NOTE:
Remove the attaching bolts
by
loosening them evenly
over two or three stages .
3.
Remove the valve rocker shaft together with the rocker arms
from the cylinder head.
4. Remove the valve rocker arm, spacer and wave washer
from valve rocker shaft.
5. Removal of camshaft
( 1) Remove the camshaft bearing cap No. 5 by removing
the two attaching bolts.
(2) Remove the camshaft bearing cap No. 1 to No. 4.
(3) Remove the camshaft.
(4) Remove the oil seat from the camshaft .
EM-63
ENGINE MECHANICALS
WJ'E90.EMt87