•
•
•
•
11. Remove the timing belt cover No. 1 and No. 2 by removing
the eight bolts.
12. Removal of timing belt
NOTE:
•
Prior to removal of the timing belt, put an arrow mark
indicating the normal rotating direction on the belt, using
a chalk or the like.
CAUTION:
•
Do not try to pry the timing belt with a screwdriver or the
like during the removal or installation.
•
Do not allow the belt to come into contact with oil, water
or dust.
•
Do not bend the belt at a sharp angle r tum the belt inside
out, for it is very vulnerable to bending.
•
Do not utilize the tension of the timing belt pulley when
loosening the set bolt of the camshaft timing belt pulley.
( 1) Rotate the crankshaft until the "F" mark of the camshaft
timing belt pulley is aligned with the indicator of the
cylinder head cover .
EM-37
ENGINE
MECHANICAL~
Mark showing
normal rotating
direction
WNU89-EM066