Daihatsu F300 Service Manual page 1306

ENGINE MECHANICAL$
5. Connection of exhaust pipe
(1) Connect the exhaust pipe to the exhaust manifold with
a new gasket interposed.
Tightening Torque:
34.3 - 49.0
N-m
(3.5 - 5.0
kgf-m)
(2) Install the exhaust manifold cover with the five attaching
bolts.
Tightening Torque:
5.9- 8.8
N-m
(0.6- 0.9
kgf-m)
(3) Connect the exhaust pipe bracket to the side of the
transmission.
Tightening Torque: 15.7-21.6 N-m (1.6- 2.2 kgf-m)
6. Installation of starter
(1) Install the starter to the engine block with the two attach-
ing bolts.
Tightening Torque:
49.0- 68.6
N-m
(5.0- 7.0
kgf-m)
(2} Connect the connector with lock and the harness
clamping bolt.
7. Tighten the five attaching bolts between the engine side
and the transmission side.
Tightening Torque: 49.0- 68.6 N·m (5.0- 7.0 kgf-m)
EM-166
•
•