Daihatsu F300 Service Manual page 1134

Hide thumbs Also See for F300:
Table of Contents

Advertisement

Damage of rim and disc
Check that the rim and disc are free from damage.
WHEEL BEARING
Rattle
(1) Move the tire up and down, holding it at the top and bottom
sections by your hands. Ensure that the rear wheel bearing
exhibits no excessive play.
(2)
Ensure that no abnormal sound is emitted when the wheel
is rotated.
(3) If excessive rattle is found, perform the check while the
brake pedal is being depressed.
(4)
If the rattle disappears, it indicates that the wheel bearing
MAINTENANCE
is loose. If the rattle persists. it indicates that the knuckle
wFE90-MA1os
section or other suspension parts are loose.
1. Steering ball joint
Inspection
Check that the castle nut at each ball joint section of the steering linkage is properly tightened. Also, check
the cotter pins for proper installation.
Grease Application
Apply chassis grease to the points bearing a
"*"
mark, as shown in the illustration
Pitman Arm
Tie rod
WFE9MAA056
MA-19

Advertisement

Table of Contents
loading

Table of Contents