Daihatsu F300 Service Manual page 1125

Hide thumbs Also See for F300:

Table of Contents

Inspection of auto choke system (Only for HO-C)

Check that choke valve is completely closed when cold engine.

Then, start the engine, check that choke valve is gradually

opened in accordance with the warming-up condition of the

ENGINE COOLANT

Check of engine coolant

(1) Check of cooling system for leakage

Apply a pressure of 1.2 kg/cm

(17 psi) to the cooling

system by means of a radiator tester.

Ensure that the pressure does not drop.

Never remove the radiator tester when the coolant tempera-

ture is still high.

(2) Check of coolant level

Check to see if the coolant level is between the LOW and

FULL lines of the reserve tank.

If the coolant level is near the low level or below the low

level, add the coolant up to the full level.

Inspection of drive belt

(1) Visually check the V belt for separation of the adhesive

rubber above and below the core, core separation from the

belt side, severed core, separation of the rib from the ad-

hesive rubber, cracks or separation of the ribs, torn or worn

ribs or cracks in the inner ridges of the ribs.

Chapters

Table of Contents