Daihatsu F300 Service Manual page 1232

•
•
•
•
6. Connect the exhaust pipe to the exhaust manifold with a
new gasket interposed.
Then, tighten the attaching nuts.
Tightening Torque: 34.3 - 49.0 N-m (3.5 • 5.0 kgf-m)
7. Install the oil level gauge support.
Tighten the clamping bolt.
8. Install the exhaust manifold cover.
Tighten the five attaching bolts .
9. Fit the surge tank stay No. 2 to the surge tank.Tighten the
attaching bolt and nut.
Tightening Torque: 29.4- 44.1 N-m (3.0 • 4.5 kgf-m)
10. Connect the cooling water hoses to the air valve on the
throttle body .
11. Connection of fuel return hose to fuel pipe No. 2.
(1) Insert the fuel return hose onto the fuel pipe No.2 until
second spool of fuel pipe.
(2) Securely clamp the fuel hose at2 •
5
mm from fuel return
hose end.
NOTE:
Install the fuel return hose in parallel with chassis frame .
EM-91
ENGINE MECHANICALS