Daihatsu F300 Service Manual page 1136

•
•
•
•
(2) Camber measurement
Specified Camber Amount: 1
o
±
1 0'
NOTE:
The measurement should be performed in the same way at
the right and left wheels.
(3) Caster measurement
Specified Caster Amount: 2°
±
30'
Specified Kingpin Angle:
go ±
30'
NOTE:
For the alignmentchecks, turn the steering wheel until the
reading of the turning radius gauge becomes 20 degrees at
the right wheel or the left wheel, respectively .
KNUCKLE
Check of knuckles rattle
GEAR BOX
Check of oil level of steering gear box
Check the steering gear box for oil level.
Specified Value: 13 - 23 mm (0.512- 0.906 inch)
NOTE:
Apply the following bond to the attaching bolt.
Bond: Daihatsu genuine sealer (999-0480-8U90-00)
Check of steering gear box tightness
Tightening Torque: 73.5-102.9 N-m (7.5- 10.5 kgf·m)
MA-21
MAINTENANCE
Apply
bond~