•
•
•
•
6. Install the cylinder head cover to the cylinder head. Tighten
the cylinder head cover attaching bolts to the specified
torque, following the sequence in the right figure.
Tightening Torque:
2.9 - 4.9
N·m
(0.3 - 0.5
kgf-m)
7. Install the spark plugs, using the following SST.
SST: 09268-87703-000
8. Connect the PCV hose to the cylinder head cover.
9. Connect the water hose to the throttle body .
10. Replace the
"On
ring of the oil level gauge guide with a new
"0" ring .
EM-163
ENGINE MECHANICALS
"""'""'"'