•
•
•
•
(3) Connect the ground cable terminal to the battery nega-
tive(-) terminal.
(4) Fill cooling water.
(5) Adjust the ignition timing.
(6) Start the engine. Ensure that no water or oil leakage is
present.
(7) Check the oil level.
INTAKE AIR TEMPERATURE SENSOR
LL
,----=
~
r--
=
'---
INSPECTION OF INTAKE AIR TEMPERATURE SENSOR
Measurement of resistance of intake air temperature
sensor
1. Disconnect the connector.
NOTE:
•
Do not pull out the lead wire. While holding the connector
section, unlock the lock and pull out the connector.
2. Remove the intake air temperature sensor .
EF-59
EFISYSTEM
II
I
"