Daihatsu F300 Service Manual page 1128

• VALVE CLEARANCE
Adjustment of valve clearances
•
NOTE:
The valve clearance adjustment is performed normally when
the engine is in a hot condition.
"Hot engine condition" denotes a condition in which the
cooling water temperature is 75 - 85
oc
(167 - 185°F) and
the engine oil temperature is above 65°C (149°F).
Valve clearances (Hot condition)
Intake: 0.25
±
0.07 mm (0.01 00
±
0.0028 inch)
Exhaust: 0.33
±
0.07 mm (0.0130
±
0.0028 inch)
IDLE SPEED
( 1) Preparation to be made prior to idle check
• Warm up the engine thoroughly.
• All accessorry switches are turned OFF.
On those vehicle equipped with a day-light system, set the
light control switch to the OFF position with head light
turned ON.
• Connect the tachometer with STI.
(SST: 09991-8n03-000)
(2) Ajustment
•
• Carburetor installed vehicle
Ajust the throttle adjusting screw so that the engine idle
speed may become the speciflied.
•
Engine Idle Speed: 850
±
50 rpm
• EFI installed vehicle
Remove the idle adjusting screw cap from the throttle body.
Then, set the idle speed by turning the idle speed adjusting
screw.
Engine Idle Speed: 850
±
50 rpm
MA-13
MAINTENANCE